当前位置:网站首页 > 新闻资讯 > 行业资讯
行业资讯
  • 桥梁检测车操作规范介绍
  • 本站编辑:xghl发布日期:2020-03-03 15:13 浏览次数:

   桥检车作为桥梁检测的重要工具,驾驶员和操作员必须由公司指定的人员进行驾驶和操作,其他人员一律不准驾驶和操作。那么,桥检车还有哪些操作规范呢?

 

    一、  日常的安全规范如下:  

 

    1、桥梁检测车是用于桥梁检测的一种专用汽车,驾驶员和操作员必须由公司指定的人员进行驾驶和操作,其他人员一律不准驾驶和操作。  

 

    2、驾驶员和操作员应认真了解桥检车的使用说明,熟练掌握车辆的性能和操作方法。  

 

    3、操作前,应对桥检车各个系统进行认真的检查,若发现故障必须及时进行维修和记录故障原因并通知公司。  

 

    4、每次工程结束后,应注意对车辆进行保养、清洁。 

 

    二、  工作时的安全规范如下:  

 

    1、操作人员要精神集中,防止误操作并严格禁酒后作业。 

 

    2、停车作业时严格按照要求的道路施工布控来进行布控。  

 

    3、桥检车展开工作平台前注意支腿安放是否到位;展开工作平台时后方应挥红旗提醒来往车辆。  

 

    4、操作手柄时要平稳,切勿急速迅猛,以免导致作业臂惯性摆动过大及意外事故。  

 

    5、要严格按照设备规定的技术参数及作业范围作业。  

 

    6、作业时,平台上操作人员每次移动时要注意并提醒施工人员处在安全位置。 

 

    7、作业时,操作人员要注意平台、臂与高低压导线、电话线及建筑物、大树、广告牌等障碍物的安全距离。  

 

    8、当值司机,负责地面并注意往来车辆的安全防护工作。  

 

    9、作业过程中,若发现车辆出现任何异常问题,应立即停止工作,待检查或修复后,方可继续工作。  

 

    10、液压系统出现故障,作业臂不能动作时,应设法使作业平台上的人员安全撤离,并通知专业维修人员处理。  

 

    11、作业完毕,作业平台,作业臂复位,收起支腿,并检查车辆周围无问题后,方可启动开车。

As an important tool for bridge inspection, the driver and operator must be designated by the company to drive and operate, and other personnel are not allowed to drive and operate. So, what are the operating rules of the bridge inspection vehicle? Bridge Inspection Vehicle 1, the daily safety specifications are as follows: 1, the bridge inspection vehicle is a kind of special vehicle used for bridge inspection, the driver and operator must be designated by the company to drive and operate, no one else is allowed to drive or operate the vehicle. 2, the driver and operator should carefully understand the use of the bridge inspection vehicle instructions, proficiency in vehicle performance and operating methods. 3, before the operation, the bridge inspection vehicle system should be carefully examined, if found fault must be timely maintenance and record the cause of failure and notify the company. 4, after each project, should pay attention to the maintenance of vehicles, cleaning. Bridge Inspection Car two, work safety norms are as follows: 1, the operator to concentrate on preventing the wrong operation and strictly prohibit the operation after drinking. 2, parking operations in strict accordance with the requirements of the road construction layout control to the layout control. 3, the bridge inspection vehicle launches the working platform before the attention outrigger placement is in place; launches the Working Platform when the rear should wave the red flag to remind the coming and going vehicles. 4, handle to smooth, do not quickly quickly, so as not to cause the work arm inertia swing too large and accidents. 5. Work strictly according to the technical parameters and operation scope stipulated by the equipment. 6, the operation, the platform operator each time to move attention and remind the construction personnel in a safe position. 7, work, the operator should pay attention to the platform, arm and high-low voltage wire, telephone lines and buildings, trees, billboards and other obstacles to the safety of the distance. 8. The driver on duty, responsible for the ground and pay attention to the safety of vehicles. 9. During the operation, if any abnormal problems are found in the vehicle, the vehicle should stop working immediately, and after inspection or repair, the vehicle can continue to work. 10, hydraulic system failure, the operation arm can not move, should try to work on the platform of the safe evacuation of personnel, and notify professional maintenance personnel to deal with. 11, the work finished, the work platform, the work arm reset, put up the outrigger, and check the vehicle around no problem, can start driving.